ClearCube R Series Pentium 4 - Manual (Page 95)

ClearCube Product Manual and Installation Guide User Port Installation • 85
Unpacking the I/Port
When unpacking the I/Port, you will find one of each of the following items:
• I/Port unit
• I/Port power supply and power cord (optional for some regions)
• Optional mouse and keyboard (may be shipped separately)
Installing the I/Port on the Desktop
To install an I/Port, do the following:
1. Make connections as shown in Figure 40.
2. Place the I/Port on a cord.
3. Press the power push-button on the I/Port to turn power on.
Configuring the PC Blade for the I/Port Connection
The Remote Desktop Protocol (RDP) is used to connect your I/Port to a PC Blade
running Windows XP Professional. The I/Port and PC Blade can be located anywhere
CAUTION: Do not attach the I/Port to a telephone jack. This will
permanently damage the I/Port. This damage is not covered under the
ClearCube Technology limited warranty.
Figure 40 Eon e100 (left) and Capio One (right) Port Connections
1. Power supply connector
2. Audio line in
3. Audio line out
4. Serial port
5. VGA video port
6. Parallel port
7. 10/100 BaseT Ethernet port
8. PS/2 Mouse port
9. PS/2 Keyboard port
10. Security lock slot (on side)
11. Power LED
12. Network activity LED
13. Power switch
14. USB 1.1 ports 1. Power supply connector
2. PS/2 keyboard port
3. PS/2 mouse port
4. Audio line out
5. Audio line in
6. Serial ports
7. Parallel port
8. VGA video port
9. 10/100 BaseT Ethernet port
10. USB 2.0 ports (rear panel)
11. Network activity LED
12. Power LED
13. On/Off switch
14. USB 2.0 ports (front panel)
1
11
14
13
12
10
2
7
9
8
6
4
3
5
6
Eon e100 Capio One
1
11
14
13
12
10
2
7
9
8
6
4
3
5