COMTEK PR-75a - Manual (Page 6)

Page 4
PR-75a SETUP AND OPERATION
Monitoring Capabilities
Because each monitoring application requires a different
headphone or transducer to best satisfy each listening
need, the PR-75a can source a strong mono audio
signal (200 mW) to either stereo or mono
headphones with an impedance as low
as 16 ohm. A hearing aid type button
receiver may be used with an impedance
as high as 2k ohm and still produce a
strong audio signal.
The PR-75a and the COMTEK NTC-102
neckloop transductor is ideal for use
with hearing aids having “T” switch
compatibility.
Can be used with consumer or
professional headphones.
Can be used with
hearing aid button
receivers for assistive
listening or acoustic
ear tube for IFB
application.
Can be used to
drive neckloop
for use with
hearing aids.