COMTEK PR-75a - Manual (Page 8)

PR-75a FREQUENCY INFORMATION
Page 6
CHANNEL FREQUENCY
A
B
C
D
E
F
G
H
I
J
72.100 MHz
72.300 MHz
72.500 MHz
72.700 MHz
72.900 MHz
75.500 MHz
75.700 MHz
75.900 MHz
74.700 MHz
75.300 MHz
72 MHz WIDE-BAND
CHANNELS
CHANNEL FREQUENCY
A
E
H
J
72.100 MHz
72.900 MHz
75.900 MHz
75.300 MHz
GROUP FREQUENCY
CHART
GROUP 1
CHANNEL FREQUENCY
B
G
I
72.300 MHz
75.700 MHz
74.700 MHz
CHANNEL FREQUENCY
C
F
72.500 MHz
75.500 MHz
Custom Programming
The Data I/O port allows
special channel programming
with the FP-75 programmer to
create new dedicated frequency
groups. These frequencies can
then operate in sequence for
“roundabout” type channel
selection with the AST push
button. A dedicated single
channel can also be programmed.
GROUP FREQUENCY
CHART
GROUP 2
GROUP FREQUENCY
CHART
GROUP 3
AutoSmart-Tuning TM Process
Plugging the earphone into the PR-75a receiver will automatically turn on
the receiver and initiate the AutoSmart-Tuning
TM process. (The LED will
blink very rapidly during this process.) The receiver will then tune itself to
the closest on-air transmitter in its vicinity. Based on the first channel found,
the receiver will then determine the channel group to which it belongs for
multiple channel operation.