DgFlick Event Xpress - Manual (Page 21)

User Manual 1.0
Page 21 of 66
Indicator and color Interpretation
Yellow
The photo quality is not good; however, the final output will be satisfactory.
Orange
The photo quality is poor and will not yield good results on printing.
Red
The photo is unsuitable for printing.
Add Effects
 To apply effects to your Design, click on ‘Effects’ tab on the left-hand option bar.
 There are 10 different options under this category. They are: Colorize, Blur, Opacity, Feather, Shadow, Glow, Outline,
Rotation, Presets and Blend.
o Colorize: Click on the photo to be modified and then click on the colorize preset to apply the effect to the
photo. To manually make changes or customize, click on ‘Custom’ button and change the color, opacity and
level using given sliders. You can reset all the given effects with a single click from ‘Reset all’ button .
o Blur : You could give a blurred appearance to the photo to make the page more visually appealing. Click on the
photo you need to blur and then select the preset of your choice under this option. Click on ‘Custom’ button to
increase or decrease the level or blurriness using the slider. You can reset all the given effects with a single click
from ‘Reset all’ button .
o Opacity : Add opacity to the photo by selecting the presets available under this option. You could also manually
choose the level of opacity by clicking on ‘Custom’ button . You can reset all the given effects with a single click
from ‘Reset all’ button .
‘Create Design’ window …. ‘Effects’ tab
Effects in ‘Effects’ tab
o Feather : Apply the feather effect to the photo by clicking on the photo and then selecting the preset of your
choice. Click on ‘Custom’ button to manually change the values of the feather using the slider. You can reset all