DgFlick Event Xpress - Manual (Page 63)

User Manual-1.0
Page 63 of 66
 Click on ‘Ok’ to proceed and on ‘Cancel’ to quit the process.
 To proceed with the building of your templates, click on ‘Build’ .
Building your template – 1
 On the ‘Build’ window, select the templates and then click on ‘Build’.
 In the text box that appears in next window, specify the
name of the folder in which you wish to save it and
the path where you want to place it.
Building your template - 2
 If the path is not specified, the built volume is saved in the following path by default: My Documents\My
Galleria\Event Xpress.
 Check the box next to ‘I agree to the terms and conditions’ and proceed to click on ‘Build’ .
! If you do not agree to the terms and conditions, close the textbox and quit the building process.
 One text box will appear which will inform you about successful buildup of templates. Click on the ‘OK’ button to
continue with saving, else click on ‘Open’ to access the created template.
! At any point during the process, you could click on the ‘Back’ button to go back to the previous Event.
Note: Some features are available only for the Event Xpress PRO version.
Share *
 Templates that have been created can be shared with other users by means of the ‘Share’ option available with Event
Xpress. This option is available only to the users of the Event Xpress PRO version.
 Click on ‘Share’ in ‘Template’ tab in ‘Create Design’ window to share the template that you have created.
 Select the templates you wish to share and then click on the ‘Share’ Template.
 The templates are shared on DgFlick’s website.