Boulder Amplifiers 860 - Manual (Page 14)

3-1
REMOTE CONTROL OPERATION
Operation of the Boulder 860 Stereo Power Amplifier by remote
control is possible when connected by a Boulderlink cable to other
Boulder preamplifiers or CD players.
When so connected, the 860 Stereo Power Amplifier will be turned
on and off with the other component.
12 VOLT TRIGGER
The 860 Stereo Power Amplifier also provides a trigger input for
remote on/off operation with other brands of equipment. With a trigger
connection, the 860 will be on when the voltage is +5 to +12 volts, and
off when the voltage is 0 volts. The tip of the mini phone plug should be
positive with respect to the sleeve.
When the 12 Volt Trigger is used, the 860 Stereo Power Amplifier will
be turned on in the sequence set by the ID switch. See page 4-2.
WARNING: Boulderlink and the trigger input should never be used
at the same time.
REMOTE
CONTROL