DJI S800 EVO - Manual (Page 17)

Assembly
Assembly
(2)
①
② ③
④
⑤
⑥
(1)
Vibration Absorber
Coaxial Align
Not
Coaxial
Align knob to mark Insert knob into arm Rotate knob
A
irc
ra
ft
N
os
e
Mark
Knob
Vibration Damper Mount
Vibration Damper Mount Details
Not
Coaxial
1. Align all knobs on H frame to the marks; refer to fig (1) .
2. Lie frame and Landing Gear horizontally, insert knobs into arms ③ and ⑥ first, and then adjust to
insert the others into the arms.
3. Make sure the Vibration Damper Mount is correct, and then rotate the knob to the end, as fig (2) shown.
Notes:
 Ensure all knobs on the H frame aligned to the marks, and they would go through the arms successfully.