DJI S800 EVO - Manual (Page 6)

In The Box
Center Frame × 1 Frame Arm × 6
Retracting Mechanism × 2 Landing Gear Support Tube ×2
Base Pipe×2 H Frame Connection Pipe×1 、Spring×2
Package of 3-PIN Servo Cable ×1 Silicone Rubber Damper ×4
Package of Battery Tray×1 Package of IMU Mount×1
GPS Fixed Seat×1
Screw Package for Frame×1
Screw Package for Landing Gear×1
Out of The Box Guidance ×2
Tools Needed
2.0mm Hex Wrench, 2.5mm Hex Wrench For mounting screws.
Thread Locker For fastening screws.
Nylon Cable Tie
For binding devices and wires. Scissors
Diagonal Cutting Pliers
Foam Double Sided Adhesive Tape For fixing receiver, controller and other modules.