DJI Ace One - Manual (Page 26)

©2012 DJI Innovations. All Rights Reserved. 26 |
Maintains
Flight Log Reading
Notice: You may be asked to provide your Ace One Flight Log for customer support.
1.
Click [TOOL]  [Read Flight-Log].
2.
Click [OK].
3.
Ace One Assistant Software will be closed automatically and Ace One MC will be working as a storage drive named [ACEONE
LOG], you can find it in [My Computer] directory.
4.
Open it and you can find your fight log files there. Copy or delete as you do normal PC operations.
5.
Please power cycle Ace One for exit from Flight Log reading mode.
You have 4GB memory space for Ace One flight log recording.
If the memory is out of space, Ace One will stop flight log recording and format all the information after power cycle the MC.
Firmware Upgrade
Please strictly follow the operation procedure for firmware upgrade, otherwise Ace One might not work properly:
1.
Make sure your computer is connected to the Internet.
2.
Please close all the other applications during the firmware upgrade, including Anti-virus software and firewall.
3.
Make sure the power supply is securely connected with Ace One. DO NOT un-plug the power supply until firmware upgrade has
finished.
4.
Connect Ace One MC to PC with micro-USB cable, DO NOT break connection until firmware upgrade is finished.
5.
Open Ace One Assistant Software and wait for connection.
6.
Select [TOOL]  [Firmware Upgrade].
7.
DJI server will check your current firmware version, and get the latest firmware prepared for Ace One Assistant.
8.
If there is a firmware version more up-to-date than your current version, you will be able to click the upgrade button.
9.
Wait until Ace One Assistant reads “Finished”.
10.
Please power cycle Ace One after at least 5 seconds.
11.
Your Ace One is up-to-date now.
 After firmware upgrade, please re-configure the Ace One via Ace One Assistant.
 If it is notified that the network or DJI server is busy, please try again later with above procedures.
 If firmware upgrade failed, the Ace One will enter <waiting for firmware upgrade status> automatically, please try
again with the above procedures.
Product Info
You can check the Ace One product version via [ABOUT]  [Info].
 Software version  Firmware version  IMU version  Hardware ID
[S/N] is a 32 digits authorization code for Ace One function activations. We had already filled in the authorization code for your Ace
One after manufacture. You might be asking to fill in the new [S/N] in the future if you brought new function upgrades.
Fill-in the [S/N] and then click [Write] button.
If you filled in the invalid S/N over 30 times, your Ace One will be locked and you have to contact our customer support.