DJI Ace One - Manual (Page 5)

©2012 DJI Innovations. All Rights Reserved. 5 |
Package Contents
 Main Controller (MC)
The Main Controller is the brain of Ace One. The MC communicates with the IMU,
GPS/Compass, engine governor, servos and RC transmitter to carry out autopilot
functionality. The MC provides a “black box” flight log, and USB interface to read flight logs,
configure Ace One and update firmware from a PC.
(System requirement: Windows XP SP3 or Windows 7)
 GPS & Compass module (GPS)
The GPS/Compass module includes two status-indicating
LEDs. It should be installed on the tail boom, where there is a
clear view of the sky.
×1
 IMU
The Inertial Measurement Unit (IMU) consists of one 3-axis
accelerometer, one 3-axis gyroscope and a barometer.
×1
 GPS Tail Boom Mount
The GPS Tail Boom Mount and double-sided foam tape enable
secured installation for the GPS/Compass module on almost
any helicopters.
×1
 3-PIN Servo Cable
Cables used to connect the MC to the RC receiver.
×10
 3M 5925 Double Sided Tape
（Only for GPS & Compass module）
×4
 Micro USB Cable
This cable is used to configure Ace One, update firmware and
download flight logs.
×1
 Quick Start Guide
For experienced users, the quick start manual provides
summary of the steps which can be found in detail in this
manual.
 Warranty Card
Ace One comes with a two-year warranty, as described on this
card. Please keep this for your personal records.
Ч1