DJI Ace Waypoint - Manual (Page 26)

©2012 DJI Innovations. All Rights Reserved. 26 |
Maintains
Flight Log Reading
Notice: You may be asked to provide your Ace Waypoint Flight Log for customer support.
1.
Click [TOOL]  [Read Flight-Log].
2.
Click [OK].
3.
Ace Waypoint Assistant Software will be closed automatically and Ace Waypoint MC will be working as a storage drive named
[ACEONE LOG], you can find it in [My Computer] directory.
4.
Open it and you can find your fight log files there. Copy or delete as you do normal PC operations.
5.
Please power cycle Ace Waypoint for exit from Flight Log reading mode.
You have 4GB memory space for Ace Waypoint flight log recording.
If the memory is out of space, Ace Waypoint will stop flight log recording and format all the information after power cycle the
MC.
Firmware Upgrade
Please strictly follow the operation procedure for firmware upgrade, otherwise Ace Waypoint might not work properly:
1.
Make sure your computer is connected to the Internet.
2.
Please close all the other applications during the firmware upgrade, including Anti-virus software and firewall.
3.
Make sure the power supply is securely connected with Ace Waypoint. DO NOT un-plug the power supply until firmware upgrade
has finished.
4.
Connect Ace Waypoint MC to PC with micro-USB cable, DO NOT break connection until firmware upgrade is finished.
5.
Open Ace Waypoint Assistant Software and wait for connection.
6.
Select [TOOL]  [Firmware Upgrade].
7.
DJI server will check your current firmware version, and get the latest firmware prepared for Ace Waypoint Assistant.
8.
If there is a firmware version more up-to-date than your current version, you will be able to click the upgrade button.
9.
Wait until Ace Waypoint Assistant reads “Finished”.
10.
Please power cycle Ace Waypoint after at least 5 seconds.
11.
Your Ace Waypoint is up-to-date now.
 After firmware upgrade, please re-configure the Ace Waypoint via Assistant Software.
 If it is notified that the network or DJI server is busy, please try again later with above procedures.
 If firmware upgrade failed, the Ace Waypoint will enter <waiting for firmware upgrade status> automatically, please
try again with the above procedures.
Product Info
You can check the Ace Waypoint product version via [ABOUT]  [Info].
 Software version  Firmware version  IMU version  Hardware ID
[S/N] is a 32 digits authorization code for Ace Waypoint function activations. We had already filled in the authorization code for your
Ace Waypoint after manufacture. You might be asking to fill in the new [S/N] in the future if you brought new function upgrades.
Fill-in the [S/N] and then click [Write] button.
If you filled in the invalid S/N over 30 times, your Ace Waypoint will be locked and you have to contact our customer support.