Vizio E600i-B3 - User Manual - Manual (Page 25)

4 Completing the First-Time Setup
19
8. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
If you have cable TV, select
whether you have a cable box
or if you connect the TV directly
to a cable from the wall.
9. If the TV Signal channel scan
screen appears, the TV will
need to scan for channels,
which takes several minutes.
Use the arrow buttons on the
remote to highlight Begin Scan
and press OK.
Otherwise, use the Arrow and
OK buttons on the remote to
select the input your TV source
is connected to.
(Number of inputs may vary
depending on your TV)
10. When you are finished, the message “Your VIZIO TV is set up”
will appear.
The First-Time Setup is complete.