Metrohm 802 Rod Stirrer - Manual (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
￭￭￭￭￭￭￭￭ 9
3.2 Mounting the 802 Stirrer to the titration stand
1
2
Mounting the propeller stirrer as follows:
1 Insert the propeller stirrer 802 Stirrer without the stirring propeller
from above into the center opening of the electrode holder.
2 Plug the stirring propeller from below to the propeller stirrer.
3.3 Connecting the 802 Stirrer to the titration stand
Connect the propeller stirrer as follows:
1 Connect the cable of the 802 Stirrer to the corresponding stirrer con-
nector (with stirrer symbol) of the titration stand.