Metrohm 802 Rod Stirrer - Manual (Page 18)

3.4 Connecting the 802 Stirrer to the sample changer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
3.4 Connecting the 802 Stirrer to the sample changer
Connecting the propeller stirrer directly to the sample
changer
Ind. Ref.
Temp.
Remote
MSB USB
Pol.
Made by Metr
ohm Switzerland
a)
b)
Connect the propeller stirrer as follows:
1 Connect the cable of the 802 Stirrer to the stirrer connector (with
stirrer symbol) on the rear of the tower (a) or directly to the sample
changer (b).