Metrohm 930 Compact IC Flex SeS/PP/Deg User Manual
Page 31
Advertising
■■■■■■■■■■■■■■■■■■■■■■
4 Installation
930 Compact IC Flex SeS/PP/Deg (2.930.1560)
■■■■■■■■
23
Setting the contact pressure correctly
1
■
Fully loosen the contact pressure lever , i.e. press it all the way
down.
■
Activate the peristaltic pump drive in the software.
■
Raise the contact pressure lever one step at a time until liquid
flows.
■
When liquid starts flowing, raise the contact pressure lever by an
additional two ratchet increments.
The contact pressure is now set optimally.
Advertising