Metrohm 850 Professional IC Anion MSM-HC MCS - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
850 Professional IC – Anion MSM-HC – MCS
￭￭￭￭￭￭￭￭ 3
interactions with the column. The Metrohm analytical columns are equip-
ped with a chip on which their technical specifications and their history
(first use / setting up, operating hours, injections, ... ) are saved.
1.2 Intended use
The instrument 850 Professional IC – Anion MSM-HC – MCS is used
for ion chromatographic determination of anions with sequential sup-
pression:
￭ Chemical suppression by the High Capacity Metrohm Suppressor Mod-
ule (MSM-HC) (see Chapter 3.16, page 51) and subsequent
￭ CO
2
suppression by the Metrohm CO
2
Suppressor (MCS) (see Chapter
3.18, page 59).
The use of this technology reduces background conductivity to an abso-
lute minimum.
If required, the instrument can also be used for the determination of cati-
ons and anions without suppression.
The present instrument is suitable for processing chemicals and flammable
samples. The usage of the 850 Professional IC – Anion MSM-HC – MCS
therefore requires that the user has basic knowledge and experience in
the handling of toxic and caustic substances. Knowledge with respect to
the application of the fire prevention measures prescribed for laboratories
is also mandatory.
1.3 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which have to be followed by the user in order to ensure
safe operation of the instrument.
1.3.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the
second to the instrument part in the figure.