Metrohm 850 Professional IC Anion MSM-HC MCS - Manual (Page 36)

3.6 Rear of the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26 ￭￭￭￭￭￭￭￭
850 Professional IC – Anion MSM-HC – MCS
1 2 3
Figure 8 Connection for the leak sensor on the rear of the instrument
1 Leak sensor connector socket
Is labeled with "Leak Sensor". 2 Leak sensor connector plug
3 Leak sensor connection cable
Is firmly mounted on the rear of the instru-
ment.
3.6.5 Drainage tubing
Fluid that escapes in the covering plate or in the detector chamber flows
through the drainage tubing into the base tray and past the leak sensor
into the waste container. This ensures that any leaks in the system will be
detected by the leak sensor.