Metrohm 940 Professional IC Vario ONE/SeS/HPG - Manual (Page 22)

4.3 Removing transport locking screws
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
14 ￭￭￭￭￭￭￭￭
940 Professional IC Vario ONE/SeS/HPG (2.940.1440)
Remove the transport locking screws
Figure 3 Removing the transport locking screws
1 Transport locking screws
For the vacuum pump. 2 Transport locking screws
For the high-pressure pump.
3 Transport locking screws
For an additional high-pressure pump in the
bottom drawer.
Store the transport locking screws in a safe place. Reinsert the transport
locking screws each time you transport the instrument a significant dis-
tance.
CAUTION
The pumps may be damaged if you transport the instrument without
inserting the transport locking screws.