16 installing the high-pressure gradient module, 17 connecting the instrument to a computer – Metrohm 940 Professional IC Vario ONE/SeS/HPG User Manual
Page 36
Advertising
4.16 Installing the high-pressure gradient module
■■■■■■■■■■■■■■■■■■■■■■
28
■■■■■■■■
940 Professional IC Vario ONE/SeS/HPG (2.940.1440)
4.16
Installing the high-pressure gradient module
The outputs of the two high-pressure pumps are connected to the injec-
tion valve's eluent input using the mixing coil for high-pressure gradients
(6.2758.000).
Connect the two pieces of eluent aspiration tubing to an eluent bottle
(see Chapter 4.6, page 17).
4.17
Connecting the instrument to a computer
NOTE
The instrument must be switched off when being connected to a com-
puter.
Accessories
For this step you need the following accessories:
■
USB connecting cable (6.2151.020)
Advertising