Metrohm Liquid Handling Station - Manual (Page 16)

3.1 Preparing the Liquid Handling Station
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭
Figure 4 Removing the magnetic stirrer dummy
Preparing the magnetic stirrer
1 Unscrew the two screws of the magnetic stirrer (2.741.0010) and
remove the clamping fastener. The clamping fastener is no longer
used in this application.
Figure 5 Removing the clamping fastener
Installing the magnetic stirrer
1 Insert the magnetic stirrer from below into the main body and place
the connection cable in the corresponding recess.
Figure 6 Inserting the magnetic stirrer