3 connection to the pc, 1 connecting cable, 2 software installation – Metrohm 771 IC Compact Interface User Manual
Page 15
2.3 Connection to the PC
771 IC Compact Interface
9
2.3
Connection to the PC
2.3.1 Connecting
cable
Always switch off 771 IC Compact Interface and PC before you con-
nect the two instruments with the 6.2134.100 Cable.
Connect the PC connection 44 at the 771 IC Compact Interface to one of
the serial COM ports at the PC using the 6.2134.100 Cable (9 pin/9
pin). If only a 25-pin COM interface is available on the PC then the
6.2125.110 Adapter cable or a commercially available adapter must be
used.
771
6.2134.100
Fig. 3: Connection of 771 IC Compact Interface to PC
2.3.2 Software
installation
The PC program «IC Net 2.0» is required for the operation of the 771
IC Compact Interface; this is contained on the 6.6034.003 CD included
in the accessories. This program runs under Windows 95, Windows 98
and Windows NT operating systems and is installed according to
sec-
tion 1.4.2
of the «
IC Net
»
Instructions for Use
.