8 annex, 1 technical data, 1 oven – Metrohm 832 KF Thermoprep User Manual
Page 27: 2 air pump, 3 temperature controller, 4 power supply, 5 safety specifications, Annex 23, Technical data, Oven
8.1 Technical data
832 KF Thermoprep, Annex
23
8 Annex
In this section you will find the most important technical data of the 832
KF Thermoprep, a list of standard and optional accessories and the
warranty and conformity declarations.
8.1 Technical data
8.1.1 Oven
Temperature range
Correction range
Heating power
Heating rate
50…250 °C
-10…+10 °C
200 VA
15 °C/min
8.1.2 Air pump
Delivery rate
Adjustment range
0…300 mL/min (0…18 L/h)
0…80 mL/min (0…4.8 L/h)
8.1.3 Temperature controller
Make
Temperature control
Display
JUMO dTRON 16.1
Self-optimizing microprocessor controller, can be used as
2-point, 3-point or continuous controller
2x 7-segment digital display of set and actual values
8.1.4 Power supply
Voltage
Frequency
Power consumption
100...120 V, 220...240 V
50...60 Hz
220 VA
8.1.5 Safety specifications
Construction and testing
According to IEC 61010, EN 61010, EN50093, protection
class 3
Safety information
The Instructions for Use contains safety information that
must be observed by the user in order to ensure the safe
operation of the instrument.