3 tubing and capillary connections, Tubing and capillary connections – Metrohm 930 Compact IC Flex ChS/PP/Deg User Manual

Page 12

Advertising
background image

1.3 Safety instructions

■■■■■■■■■■■■■■■■■■■■■■

4

■■■■■■■■

930 Compact IC Flex ChS/PP/Deg (2.930.1360)

WARNING

Never open the housing of the instrument. The instrument could be
damaged by this. There is also a risk of serious injury if live components
are touched.

There are no parts inside the housing which can be serviced or replaced
by the user.

Mains voltage

WARNING

An incorrect mains voltage can damage the instrument.

Only operate this instrument with a mains voltage specified for it (see
rear panel of the instrument).

Protection against electrostatic charges

WARNING

Electronic components are sensitive to electrostatic charges and can be
destroyed by discharges.

Do not fail to pull the mains cable out of the mains connection socket
before you set up or disconnect electrical plug connections at the rear
of the instrument.

1.3.3

Tubing and capillary connections

CAUTION

Leaks in tubing and capillary connections are a safety risk. Tighten all
connections well by hand. Avoid applying excessive force to tubing
connections. Damaged tubing ends lead to leakage. Appropriate tools
can be used to loosen connections.

Check the connections regularly for leakage. If the instrument is used
mainly in unattended operation, then weekly inspections are manda-
tory.

Advertising