Metrohm 843 Pump Station with peristaltic pump - Manual (Page 23)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
843 Pump Station with Peristaltic Pumps ￭￭￭￭￭￭￭￭ 15
3 Slide the safety shield all the way to the rear until it audibly snaps in.
Remove the safety shield
1 Press the tab slightly down.
2 Remove the safety shield.
3.3 Connecting control devices
Various possibilities are shown below for connecting different instruments
to the 843 Pump Station. Instruments which control the pumps of the Pump
Station are connected to Remote 1, while all other instruments are con-
nected to Remote 2. The figures also contain the order numbers of the
required cables.