Metrohm 803 Ti Stand - Manual (Page 9)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
803 Ti Stand ￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Instrument description
The 803 Ti Stand with a magnetic stirrer and a built-in pump is part of the
Titrando system. It is mainly used for volumetric Karl Fischer titration
together with a Titrando.
The titration stand is directly connected to the Titrando via an MSB con-
nection cable.
With the integrated membrane pump it is possible to aspirate the titered-
out solution and to add a new solvent without having to open the titra-
tion cell.
1.2 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.2.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the
second to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Warning
This symbol draws attention to a possible life hazard
or risk of injury.
Warning
This symbol draws attention to a possible hazard due
to electrical current.