Banner VALU-BEAM Series - Manual (Page 19)

VALU-BEAM Accessories
19
RF1-2NPS Compression Fitting for attaching
armored cable or PVC tubing to VALU-BEAM
sensors (not for "QD" models). Model AC-6 armored cable jacket for VALU-
BEAM sensors (not for "QD" models). Six-foot
length. Size: I.D. = 5/16"; O.D. = 7/16". Model PVC-6 flexible PVC tubing for VALU-
BEAM sensors (not for "QD" models). Six-foot
length. Size: I.D. = 1/4"; O.D. = 3/8".
Compression Fitting PVC Cable Tubing
Extension Cable
Extension cable in 100-foot lengths:
Model EC312-100 4-wire cable for SM912 Series dc sensors. Wire colors: brown, blue, black, white.
Model EC312A-100 2-wire cable for emitters and SM2A912 Series 2-wire ac sensors and SMA990
series. Wire colors: brown, blue.
Model EC900A-100 3-wire cable for SMA912 Series ac sensors. Wire colors: brown, blue, black.
Model EC915-100 5-wire cable for SMA915, SMB915, and SMW915 Series ac/dc sensors. Wire
colors: brown, blue, black, white, yellow.
NOTE: extension cable may be ordered in lengths greater than 100 feet on a quote basis.
Armored Jacket
Upper Covers (lens assemblies)
VALU-BEAM upper covers (above). Upper cover model UC-
900J (on the right in the photo) is a flat, clear Lexan
® window which
acts as a dust cover for the lens area when the sensor is mounted
facing up. The UC-900J may be attached to the following VALU-
BEAMs: E, R, ESR, RSR, LV, and D.
VALU-BEAM "upper covers" consist of a bezel, a lens, and mounting
hardware. Depending upon the model of VALU-BEAM in use, they allow
sensing mode and/or sensing range changes in the field.
Table I below lists the various VALU-BEAM sensor types and the upper cover
models they are supplied with. It tells you which upper cover to order for strictly
replacement purposes. VALU-BEAMs are identified by their model number
suffixes, which designate their sensing mode. For example, an SM912LVAG or
SM2A912LVAG sensor uses a model UC-900AG upper cover.
Table II lists the sensing mode and range changes that may be accomplished by
substituting a different upper cover. For example, if you want to convert an F
(fiberoptic) type VALU-BEAM to a D (diffuse) type, order and install upper cover
model UC-900L. The conversions listed are direct model conversions which may
be made simply by changing VALU-BEAM upper cover assemblies. Other
conversions are possible: contact the Banner applications staff with any questions.
Table I: Replacement Covers
Uses upper cover
model:
UC-900AG
UC-900C
UC-900DSR
UC-900F
UC-900FP
UC-900L
Use UPPER
COVER:
UC-900L
UC-900L
UC-900L
UC-900L
UC-900DSR
VALU-BEAM
Type:
LVAG
CV, C
DSR, ESR, RSR
F
FP
E, R, LV, D
To change:
LV to LVAG
LV to CV
D to DSR
D to F
DSR to F
EF to ESR
RF to RSR
Table II: Mode/Range Change Cross-reference
To change:
LVAG to LV
CV to LV
DSR to D
F to D
F to DSR
Use
UPPER COVER:
UC-900AG
UC-900C
UC-900DSR
UC-900F
UC-900F
UC-900DSR
UC-900DSR