Banner VALU-BEAM Series - Manual (Page 20)

Banner Engineering Corp. 9714 Tenth Ave. No. Minneapolis, MN 55441 Telephone: (612)544-3164 FAX (applications): (612)544-3573
SMB900 Mounting Bracket
Accessory mounting bracket
model SMB900 has curved mount-
ing slots for versatility in mount-
ing and orientation. The sensor
mounts to the bracket by its
threaded base, using a jam nut and
lockwasher (both included). The
bracket material is 11-gauge zinc-
plated steel. The curved mounting
slots have clearance for 1/4"
screws.
SMB30S Mounting Bracket
Swivel mounting bracket model
SMB30S offers the ultimate in flex-
ibility and convenience. The
SMB30S bracket mounts by its
base. The base of the VALU-
BEAM sensor threads into the cap-
tive "ball" of the bracket, which is
locked snugly in position when the
two clamping/mounting bolts are
tightened. Bracket material is black
VALOX
® . Hardware is stainless
steel, and bolts are included.
!
WARNING
VALU-BEAM photoelectric presence sensors do NOT include the self-checking redundant circuitry necessary
to allow their use in personnel safety applications. A sensor failure or malfunction can result in either an energized or a de-energized
sensor output condition.
Never use these products as sensing devices for personnel protection. Their use as safety devices may create an unsafe condition which
could lead to serious injury or death.
Only MACHINE-GUARD and PERIMETER-GUARD Systems, and other systems so designated, are designed to meet OSHA and
ANSI machine safety standards for point-of-operation guarding devices. No other Banner sensors or controls are designed to meet these standards, and
they must NOT be used as sensing devices for personnel protection.
This black neoprene assembly easily slips over the prewired cable and threads into the base of a VALU-
BEAM sensor. The flexible extender prevents sharp cable bends and extends the life of cable that is
subject to repeated flexing.
The HF1-2NPS includes a neoprene gland that compresses around the VALU-BEAM cable to provide
an additional seal against moisture.
This flexible conduit protector is resistant to gasoline, alcohol, oil, grease, solvents, and weak acids. It
has a working temperature range of -30
°
to +100
°
C (-22 to +212
°
F). It is UL recognized and CSA
certified.
The HF1-2NPS also threads into the base of OMNI-BEAM, MULTI-BEAM, MAXI-BEAM, and SM30
Series sensors. It is sold in packages of 10 pieces.
HF1-2NPS Flexible Cable Protector
VALU-BEAM Accessories