Banner SM30 High-Power Series - Manual (Page 4)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
SM30 Series 30 mm Barrel Sensor
P/N 03541 Rev. E
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will
repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This
warranty does not cover damage or liability for misuse, abuse, or the improper application of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE
TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE,
TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp.
Quick-Disconnect (QD) Cables
Style Model Length Connector Use with Pinout
3-pin Mini-Style
SM30CC-306
SM30CC-312
2 m (6.5')
4 m (12')
Straight
Emitters and
AC receivers
Green
Red/White Red/Black
Male Pinout
4-pin Mini-Style
MBCC-406
MBCC-412
MBCC-430
2 m (6.5')
4 m (12')
9 m (30')
DC receivers
White Black
Blue Brown
Male Pinout
SMB30A
• 30 mm, 12-gauge, stainless steel, right-angle bracket with a curved mounting slot for versatile orientation
• Clearance for M6 (1/4") hardware
SMB30C
• 30 mm split clamp bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting hardware
SMB30MM
• 30 mm, 12-gauge, stainless steel, right-angle bracket with curved mounting slots for versatile orientation
• Clearance for M6 (1/4") hardware
SMB30SC
• 30 mm swivel bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting and swivel locking hardware
Mounting Brackets
Apertures
Model Description
APG30S
Kit includes: a thread-on stainless steel housing, a flat
glass lens, two quad-ring seals, plus 3 round and 3
slotted aperture disks