Banner ECONO-BEAM SE61 Series - Manual (Page 5)

page 5
ECONO-BEAM Sensors –
Miniature Self-Contained DC Sensors
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
Visible red, 650 nm
An excellent option where sensing must be accomplished in tight, inaccessible or volatile areas. Fibers withstand
vibration and shock and are immune to electrical noise. Plastic fibers function well at temperatures between -30°
and +70°C (-20°F to +158°F), and stand up to repeated flexing. Most are easy to shorten in the field, to develop
custom installations. Not recommended for severe environments.
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE612FP W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g.,
SE612FPMHS). Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
ECONO-BEAM Plastic Fiber Optic
Diffuse mode performance based on 90% reflectance white test card
Models* Range
SE612FPNC
SE612FP
Range
varies by
sensing
mode and
fiber
optics
used
2 m (6.5') 10-30V dc
Bipolar
NPN/PNP
LO
1
10
100
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SE612FP
Opposed Mode
Plastic Fibers
PIT26U Fibers
PIT46U Fibers
100 mm
4 in
125 mm
5 in
75 mm
3 in
50 mm
2 in
25 mm
1 in
0
0
15 mm
30 mm
45 mm
15 mm
30 mm
45 mm
0
.6 in
1.2 in
1.8 in
.6 in
1.2 in
1.8 in
DISTANCE
SE612FP
Opposed Mode
Plastic Fibers
PIT46U PIT26U
Cable
Supply
Voltage
Bipolar
NPN/PNP
DO
Output
Type
Excess Gain Beam Pattern
30 mm
1.2 in
37.5 mm
1.5 in
22.5 mm
.9 in
15 mm
.6 in
7.5 mm
.3 in
0
0
1.2 mm
2.4 mm
3.6 mm
1.2 mm
2.4 mm
3.6 mm
0
.05 in
.10 in
.05 in
.10 in
.15 in
.15 in
DISTANCE
SE612FP
Diffuse Mode
Plastic Fibers
PBT46U PBT26U
1
10
100
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
0.1 mm
0.004 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SE612FP
Diffuse Mode
Plastic Fibers
PBT26U Fiber
PBT46U Fiber