Banner ECONO-BEAM SE61 Series - Manual (Page 8)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 888.373.6767 • www.baneng.com • E-mail: [email protected]
ECONO-BEAM Sensors –
Miniature Self-Contained DC Sensors
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
Retroreflective Targets
65°C (150°F)
65°C (150°F) BRT-2A
Model
Reflectivity
Factor
Maximum
Temperature
BRT-3* 1.0
1.0
84 mm diameter
65°C (150°F) BRT-50 1.0
56 mm diameter
65°C (150°F)
65°C (150°F) BRT-1
BRT-1.5 1.0
1.0
Size
51 mm diameter
65°C (150°F) BRT-.6 1.0
46 mm diameter
65°C (150°F) BRT-50D* 1.0
25 mm diameter
50°C (120°F)
50°C (120°F) BRT-92X92C*
BRT-100X55A
50°C (120°F)
50°C (120°F) BRT-50R*
BRT-42D 1.0
1.0
20 mm diameter
51 mm diameter
50°C (120°F) BRT-25R 1.0
132 mm x 55 mm
50°C (120°F) BRT-42A 1.0
100 mm x 100 mm
1.5
3.0
42 mm diameter
51 mm diameter
50°C (120°F) BRT-77X77C* 2.0
25 mm diameter
50°C (120°F) BRT-100X50 1.5
42 mm diameter
50°C (120°F)
50°C (120°F) BRT-36X40BM
BRT-2X2 1.0
1.2**
85 mm x 85 mm
101 mm x 51 mm
50°C (120°F) BRT-60X40C* 1.4
51 mm x 61 mm
50°C (120°F) BRT-48X32 1.0
51 mm x 61 mm
50°C (120°F)
50°C (120°F) BRT-48X32B
BRT-48X32A 1.0
1.0
41 mm x 60 mm
33 mm x 48 mm
50°C (120°F) BRT-40X23 1.4
33 mm x 65 mm
50°C (120°F) BRT-40X23B 1.4
33 mm x 57 mm
50°C (120°F)
50°C (120°F) BRT-40X18A
BRT-35X20A 1.4
1.0
24 mm x 40 mm
24 mm x 48 mm
50°C (120°F) BRT-53X19A 1.4
24 mm x 55 mm
50°C (120°F) BRT-100X18A 1.4
18 mm x 60 mm
65°C (150°F) BRT-L 0.8
19 mm x 72 mm
200°C (390°F) BRT-41AHT 1.0
19 mm x 120 mm
480°C (900°F) BRT-4HT*** .15
165 mm x 19 mm
41 mm diameter
100 mm x 100 mm
* Optional brackets are available; see Banner Photoelectric Product Catalog
** Target has micro-prism geometry
NOTE: The range of all retroreflective sensors is specified
using target model BRT-3. Sensing range and signal
strength at any given sensor-to-target distance will
vary due to target reflectivity and target area. A
“Reflectivity Factor” is included for each target model
to help predict sensor performance, relative to the
excess gain curve plotted for target model BRT-3.
Consider, also, target area when predicting
performance.