BellSouth PID99 - Manual (Page 6)

8
S t e p 4 S e l e c t To n e / P u l s e D i a l i n g M o d e
Depending on your dialing system, set the Dial Mode switch as follows:
I f y o u r d i a l i n g s y s t e m i s : S e t s w i t c h t o :
Tone T
Pulse P
If you are not sure of your dialing system, make a trial call with the Dial
Mode switch set to T. If the call connects, leave the switch as is; otherwise,
set to P.
S t e p 5 P ro g r a m m i n g Yo u r Vo i c e M a i l A c c e s s N u m b e r
If you subscribe to Memory Call voice mail service through BellSouth, you
can automatically dial your Voice Mail access number with a touch of the
MESSAGE key.
To program your Voice Mail access number:
a) When the MESSAGE key is first pressed, the display will show
ENTER PHONE NUM.
b) Enter the Voice Mail access number exactly as you would normally dial
it to retrieve your voice messages.
c) Press the MESSAGE key again to store the number in memory.
The display will show NUMBER STORED.
To change your Voice Mail access number previously stored in memory,
press and hold the MESSAGE key until the display shows ENTER PHONE
NUM. Then enter the new number and press the MESSAGE key again to
store it in memory.
Once the number is stored, simply lift the handset, wait for dial tone and
press the MESSAGE key. The phone will automatically dial your Voice Mail
access number.
9
I N S T A L L A T I O N W I T H A T E L E P H O N E
A N S W E R I N G M A C H I N E
PHONE
ANSWERING MACHINE
OUTLET JACK
P T
PULSE/TONE