Black Box IC187C - Manual (Page 12)

11
CHAPTER 3: Card Setup
Examples on the following pages describe all of the valid settings for J1B
and J2B.
Interface Mode Examples J1D – J4D
Figure 3-1. Headers J1B and J2B set for RS-422.
Figure 3-2. Headers J1B and J2B set for RS-485 “Auto” with “No Echo.”
Figure 3-3. Headers J1B and J2B set for RS-485 “Auto” with “Echo.”
AT
RT
NE
AT
RT
NE
AT
RT
NE