Hinkley Lighting MERIDIAN 3876SK - Manual

assembly instructions
Family: Meridian Item No. 3876
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body of the fixture, making all necessary electrical connections, hanging the fixture
from the ceiling, and then installing the glass.
start here
3876
Note: Maximum wattage for 3876 fixture is 60 watts per G9 bulb.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, spread arms (A) located on the main body assembly (1), until
they are equally spaced 60 degrees apart - see Drawings 1 & 3.
2. Determine the combined length of stems (B) that will be required to hang the fixture
at the proper height - see Drawing 2.
3. Slip stems (B) along wire and thread tube (C) at top of fixture.
4. After last stem is secured, slip loop (D) along wire and thread at top of stems (B).
5. Take quick link (E), open and attach to loop (D).
6. Please refer to the hanging instruction sheet (I.S. 19-50) provided to hang fixture.
Then refer back to this sheet to install glass.
1. To install glass, remove socket ring (2) from socket (4) - see Drawing 3.
2. Slip glass (3) over socket (4).
3. Thread socket ring (2) onto socket (4) to secure glass (3).
4. Fixture can now be lamped accordingly.
5. Thread bulb shield (5) onto socket until snug.
Drawing 1 - Assembly
Drawing 2 - Assembly
Drawing 3 - Glass Installation
3
2
5
1
A
6.01.11
E
D
B
C
4
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com