Bayou Classic 500-535 - Manual (Page 9)

SIDE SHELF PLACEMENT & ATTACHMENT
A B C
7. A. Remove both locking nuts from bottom band on grill body where shelf is to be attached.
(Locking nuts may be in poly bag)
B. With shelf in folded position, place shelf slots onto both bolts. Loosely screw nuts on each bolt. Then
slide shelf backwards or forwards on bolts until you find the desired position on grill. Most people prefer
to position shelves close to front side of grill.
C. WRENCH TIGHTEN NUTS.
8. A. Start with shelf in folded down position.
B. Lift bottom of shelf up to about a 30˚ Angle and push in as far as slot will allow.
C. Then push down to lock shelf under tab. Reverse these steps to fold shelf down when not in use.
FOLDING SIDE SHELF
A B C
PUSH IN
PUSH DOWN
AND LOCK
UNDER TAB
SLOT
LOCKING TAB
9. Utensil Hooks are provided for both side shelves. No tools are needed to attach hooks. Attach as many
hooks as desired on both front and back side of shelf.
SIDE SHELF UTENSIL HOOKS
12 - Utensil Hooks
Slide shelves laterally to desired position... then wrench tighten locking nuts.
Side Shelf Bolts
Side Shelf Side Shelf
8
COMPLETED ASSEMBLY - READY TO COOK!
WARNING
To prevent grill from tipping over, do not roll over uneven surfaces. Be very careful when moving grill
to the cooking or storage location. Always lock down tabs on caster wheels after moving the grill.