Beko 37WLU550FHID - Manual (Page 19)

17
After setting is complete, press the EXIT
button to exit the menu.
6.4.4.3-Skipping a stored channel
In the event that you do not wish
to see certain programs while
navigating through the channels
using the PR+/PR- buttons,
then you can use this function. Select the
program that will be hidden by pressing the
up/down or right/left movement buttons.
“Press the “ RED” button. The name of the
program to be skipped shall appear in red.
You may perform this procedure for more
than one program. To view the skipped
program, directly enter the program number
using the numeric buttons. To cancel the
program skipping process, press again the
“ RED” button. After setting is complete,
press the EXIT button to exit the menu.
6.4.4.4-To name the channels
You can assign your program or
programs of choice the names that
have a maximum of five characters.
Select the program you would like
to name from the Program Table by
pressing the up/down or right/left
movement buttons. “Press the “ YELLOW”
button. An empty space appears beside
the channel for which you would like to
specify name information. Here, choose the
desired letter, number or sign using the up/
down movement buttons. For the second
character, press the right movement
button and then select the desired letter,
number or sign again with the up/down
movement buttons. After entering all the
characters, store the name you have written
in the memory by pressing the “ YELLOW”
button. To write names for any of the
other programs, simply repeat the above
procedure. If you want to exit the menu,
simply press the EXIT button. If the program
is not named, then the channel number of
that program will be displayed automatically.
6.4.4-Program Table
Press the
MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program Table menu will be displayed.
PROGRAM TABLE
00
01 CHANNEL
02 CHANNEL
03
04
05
06
07
08
09
10
11
12
13
14
SKIP
MOVE NAME
DELETE
SELECT BACK
6.4.4.1-Switching the locations of the
stored channels
Select the program you would like
to relocate by pressing the Up/
Down or Left/Right movement
buttons. “Press the “ GREEN”
button. Green will blink. Move to
the other program you would like to
relocate by pressing the up/down
or right/left movement buttons.
“Finish the relocation process by
pressing the “ GREEN” button.
The channel in the first program
number you selected has been
moved to your second selected
program number and the channels between
both program numbers have been shifted to
the initially selected program number. After
setting is complete, press the EXIT button to
exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like
to delete by pressing the up/down
or right/left movement buttons.
“Press the “ BLUE” button. The
blue button on the menu will blink
for approval. “You may perform the deletion
process by pressing the “BLUE” button
or you may abort the deletion process by
pressing the MENU button. “Once you pres
the BLUE button, the selected program
is deleted and the following channels are
transferred to after this program number.