Beko 37WLU550FHID - Manual (Page 32)

30
10 Help and tips
Failure Possible cause Solution
The television does not function
Is the power cord connected to the
mains supply?
Check the power cord.
Is the On/Off button on? Check if the On/Off button is on.
Poor picture quality (analogue TV)
Is the aerial cable connected? Check the aerial cable.
Aerial may be affected by two
connected external devices.
Try disconnecting one of the devices.
It may need fine tuning. Perform fine tuning.
Picture settings are not correct.
Adjust Brightness, Contrast and
Colour.
Shadow and reflection in the
picture.(analogue TV)
Channel setting
Perform automatic, manual channel
setting or fine tuning.
Aerial misaligned Check aerial direction
No picture
Is there any damage to the aerial or
cable?
Check and replace the aerial and or
cable.
Are you sure you pressed the correct
button on your remote control?
Press PR+ or PR- button to turn on
the TV.
No colour.
Colour intensity level is at the lowest
setting.
Lighten the colour.
Problem in channel broadcasting. Test with another channel.
No or defective teletext
Television channel (no teletext) or
Test another channel for fine tuning
and shadowy pictures
Very weak signal Check the aerial system.
No sound
Temporary sound mute may be on Try pressing the mute button
Is the sound turned down? Turn on the volume with Vol + button.
Remote control does not work
Are the batteries correctly placed? Place the batteries correctly.
Are batteries exhausted? Replace the batteries with new ones.
Is there any obstacle between the
remote control and television?
If yes, remove it.
Picture is not visible after turning
on the TV
Child lock is active. Disable the child lock.
If your television does not work properly even though you tried the above mentioned
solutions, try turning it on and off again. If you cannot start your television even though you
have applied all noted methods, refer to the dealer from where you purchased the product.
Never attempt to repair a faulty device yourself.