Hinkley Lighting FRANCESCA FR40313SLF - Manual

FR40313SLF
FRANCESCA
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first installing the mounting hardware
to the junction box, making all necessary electrical connections, mounting the fixture to
the ceiling and then attaching the crystals.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring is
required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1 To assembly fixture first take fixture arms (a) and rotate them until they are
approximately 120 degrees apart - see Drawing 1.
2 Slip loop (1) along supply wire and thread onto threaded tube (b) and tighten.
3 Slip candle sleeve (2) over socket (c).
4 Thread bottom decorative knob (3) onto threaded tube (d) at bottom of fixture.
STEP 2
1 It is recommend that the fixture be installed prior to attaching the crystals.
Please follow mounting instruction sheet [FRIS 19] provided to
hang the fixture.
2 After fixture is mounted please refer to crystal hanging instruction sheet to
complete fixture assembly.
[DRAWING 1]
[DRAWING 2]
Bulbs: 60W CAND. Replacement Parts: CRYSTALS: R40310CRY / R40310CRY-A / R40310CRY-A
01.01.12
1
2
a
c
3
a
a
a
b
d