Hinkley Lighting FRANCESCA FR40313SLF - Manual (Page 2)

Bulbs: 60W CAND. Replacement P arts: GLASS: R40310CRY / R40310CRY-A / R40310CRY-B
CRYSTAL INSTALLATION INSTRUCTIONS
01.01.12
FRANCESCA
FR40313SLF
There are 2 types of crystals that need to be installed on this fixture. It
is recommended that the flower crystals be attached first, followed by
the teardrop crystals, and then the compelted bobesches.
STEP 1 FLOWER CRYSTALS
1 All flower crystals (f) attach in the same manner. There locations
are illustrated in Drawing 1.
2 First remove ball knob with stud (b) and rubber washers (r)
from location (1) on Drawing 1.
3 To attach flower crystal, first slip rubber washer (r) onto stud (s),
next slip crystal flower (f) onto stud, followed by another
rubber washer (r) - see Drawing 2 below.
4 Thread stud (s) into end of arms at locations (1) on Drawing 1.
5 After flower crystal is secure, attach one tear drop crystal (t) to end of
ball knob stud (b).
[DRAWING 2]
f
r
r
1
STEP 2 BOBESCHE ASSEMBLY
[DRAWING 1]
b
s
t
1 Take bobesche crystals (bc) and slip them over candle sleeve (cs).
- see Drawing 2 and 3.
2 Take a teardrop crystal (t) and attach to bobesche crystal (bc) at
location (2). Note: each bobeche requires 4 teardrop crystals.
3 One teardrop crystal is attached at the base of the fixture at
location (3).
[DRAWING 3]
t
2
bc
cs
R40310CRY
R40310CRY-B
R40310CRY-A
1
1
1
3
a
1
2
1