BOXLIGHT CP-324i - Manual (Page 48)

48
Warranty And After-Service
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and
run through the suggested checks. If this does not resolve the problem, please
contact your dealer or the service company. They will tell you what warranty
condition is applied.
Specifications
Specifications
NOTE • This specifications are subject to change without notice.
Item Specification
Product name Liquid crystal projector
Liquid
Crystal
panel
Panel size 1.8 cm (0.7 type)
Drive system TFT active matrix
Pixels 786,432 pixels (1024 horizontal x 768 vertical)
L
ens Zoom lens F=1.7 ~ 1.9 f=21.8 ~ 26.2 mm
L
amp 165W UHB
Power Supply AC100-120V/2.7A, AC220-240V/1.5A
P
ower Consumption 240W
Temperature range 5 ~ 35°C (Operating)
Size
297 (W) x 64 (H) x 233 (D) mm
(
Not including protruding parts)
• Please refer to the following figure.
W
eight (mass) 2.5 kg
Ports
Optional
parts
Lamp DT00671
Air filter NJ09702
Others • Please consult your dealer.
RGB input:
RGB IN1 ..D-sub 15pin mini x1
RGB IN2 ..D-sub 15pin mini x1
RGB output:
RGB OUT D-sub 15pin mini x1
Communication port:
CONTROL ............ D-sub 9pin x1
USB ....................... USB(B) x1
Video input:
COMPONENT VIDEO
Y ............................... RCA x1
C
B
/P
B
....................... RCA x 1
C
R
/P
R
...................... RCA x 1
S-Video ................................ 1
Video .................................... 1
Audio input:
AUDIO IN1 ...... Stereo mini x1
AUDIO IN2 ...... Stereo mini x1
Audio output:
AUDIO OUT ... Stereo mini x1