E-flite Hawker Sea Fury 400 ARF - Manual (Page 26)

26 E-flite Hawker Sea Fury 400 ARF Assembly Manual
 2. Use sandpaper to remove any irregularities from the
fin and rudder.
 3. Mount the control horn to the rudder as shown using
two 2mm x 10mm sheet metal screws, control horn
backplate and a #1 Phillips screwdriver.
 4. Cut slots in the rudder for the three rudder hinges. Use
foam-safe CA to glue the hinges half-way into the rudder
as shown.