E-flite Hawker Sea Fury 400 ARF - Manual (Page 27)

27 E-flite Hawker Sea Fury 400 ARF Assembly Manual
 5. Use a pin drill and 1/8-inch (3mm) drill bit to drill a
hole for the tail gear wire in the rudder.
 6. Hold the rudder against the fin and use a felt-tipped
pen to transfer the location of the hinges to the find.
 7. Use a hobby knife to cut the slots for the rudder hinges
in the fin.
 8. Slide the operational tail gear wire through the tail
gear bushing as shown.