E-flite Pitts Model 12 15e ARF - Manual (Page 31)

31 E-flite Pitts Model 12 15e ARF Assembly Manual
 4. Use canopy glue to attach the canopy to the
fuselage. Use tape to hold the canopy in position until
the glue fully cures.
Optional Accessories
Note: The tail surface flying wires are included for you
to add if you desire. They are not required for everyday
flight or even 3D flight.
 1. Attach the flying wires to the fin and stabilizer using
2mm x 10mm machine screws and 2mm nuts. Use
threadlock on the nuts to prevent them from vibrating
loose.