BenQ S700 - Manual (Page 100)

84 Using Your Phone
Reply Path
You can ask the network to set the route of the reply message
via your own message center. If you set this function on and
then send a message to someone and the person replies, the
reply will follow the path of the previous message that you sent.
Delivery Report
After activating this function, the network vendor will report
to you when a message has been delivered.
MMS
You can edit and send MMS messages using this menu.
Before you start to use MMS, you must subscribe to both GPRS and
MMS services provided by your operator. Some operators may
complete needed MMS settings for you after you subscribe to MMS.
If this is not the case, you need to manually configure MMS settings in
your phone to be able to use MMS.
Because MMS uses your operator's MMS server on a GPRS network
to send messages to phones, you need to adjust the following settings
correctly in order to use MMS:
Go to the menu: Oper.Service > Wap > Settings, choose the server you
want, then adjust the settings below :
Gateway Address For example, 10.1.1.1
Port Number For example, 9201
Go to the menu: Oper.Service > Wap > Settings > Select Gateway >
MMS, and then select the server to use for MMS :