BenQ S700 User Manual
Page 196
180
Data Cable Software Installation
When BenQ S700 Handset Manager is installed successfully, go to
Start > Programs > BenQ S700 Handset Manager (i.e.
) to start this application.
If the BenQ Handset Manager application is not able to detect the
USB port currently in use when running PC Sync, perform the steps
below (please note that your phone must be connected to the PC
when running PC Sync):
a. Right-click on the My Computer icon located on the PC desktop
to open the My Computer dropdown menu. Choose Properties
> Hardware > Device Manager. On the Device Manager menu,
click Ports to check the port being used.
b. On the BenQ Handset Manager screen, click the button
and choose
from the dropdown
menu. The following screen will appear. Choose the correct USB
port and click on OK.