Glyph ForteRAID - Manual (Page 9)

9
Glyph Manager Operation In Mac OS X
The ForteRAID ships in RAID 0 mode, and drive mode changes are made by using the Glyph Manager soft-
ware utility (not the OS X Disk Utility). OS X Disk Utility is used to format the new device after drive mode
changes are made.
READ THIS FIRST! Changing drive modes with Glyph Manager will require you to re-format the ForteRAID, and
result in erasing all of the current data on the drive. Make sure you backup all data before doing so!
To change the drive mode, follow these steps:
1. Install Glyph Manager 4 (or later) software.
2. Connect the ForteRAID via FireWire or USB, and open Glyph Manager software. If you have more than one
ForteRAID connected, choose the desired unit from the list on the left. You can identify the units by their
volume names.
NOTE: To change drive modes, ForteRAID must be connected via FireWire or USB.