Belkin F5D7634-4A-H User Manual
Page 80
78
G Wireless Modem Router
sections
table of contents
1
2
3
4
5
6
7
8
10
9
aPPendIXes
PPPoe
Most ADSL providers use PPPoE as the connection type� If you use an
ADSL modem to connect to the Internet, your ISP may use PPPoE to log
you into the service�
Your connection type is PPPoe if:
1
Your ISP gave you a user name and password which is required to
connect to the Internet�
2
Your ISP gave you software such as WinPoET or Enternet300 that
you use to connect to the Internet�
3
You have to double-click on a desktop icon other than your
browser to get on the Internet�
To set the Router to use PPPoE, type in your user name and password
in the spaces provided� After you have typed in your information, click
“Apply Changes”�
After you apply the changes, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly�
PPPoa
Enter the PPPoA information in the provided spaces, and click “Next”�
Click “Apply” to activate your settings�
1
User name - Enter the user name� (Assigned by your ISP)�
2
Password - Enter your password� (Assigned by your ISP)�
3
Retype Password - Confirm the password� (Assigned by your ISP)�
4
VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here� (Assigned by your ISP)�
disconnect after X
This feature is used to automatically disconnect the Router from your
ISP when there is no activity for a specified period of time� For instance,
placing a check mark next to this option and entering “5” into the minute
field will cause the Router to disconnect from the Internet after five
minutes of no Internet activity�
This option should be used if you pay for your Internet service by
the minute�