Breville BKC600XL - Manual (Page 12)

11
™
continued
e.
AD’. Open
and
etely. The
EW’.
omplete
® brew
2).
ater Filter
cess (page
the
ated.
O BREW’.
and the
for up to
conds,
nd the
ccidental
e, open
owering
Note
ate. The
oved to
gs.
wing
6. Place the K-Cup® in the K-Cup® Holder (located
in the Brewing Chamber). Do not remove the foil
lid or puncture the K-Cup®.
There are two sharp needles that puncture the
K-Cup®. One on the underside of the Brewing
Chamber Head and the other in the base of the
K-Cup® Holder. To avoid risk of injury, do not
put your fingers in the Brewing Chamber or
K-Cup® Holder.
Note
7. Lower the Safety Locking Arm to close the
Brewing Chamber Head over the K-Cup® Holder.
When closed completely, the LCD screen will
indicate ‘READY TO BREW’. The
and
buttons will illuminate and the ‘BREW’ button will
illuminate and flash for up to 60 seconds
a) The LCD screen will indicate the default brew
size (7.25 oz.). To choose a different size,
press the
button to go up in size or the
button to go down in size.
Select from a stronger small cup (5.25 oz. serving),
a small mug (7.25 oz. serving), a large mug (9.25
oz. serving) or a travel mug (11.25 oz. serving).
The small mug (7.25 oz. serving) is the default
brew size. To program your favorite brew size, refer
to Setting the ‘BREW SIZE’ feature (page 20).
Note
b) Once the brew size is selected, press the ‘BREW’
Button. The ‘BREW’ button will stop flashing, the
and buttons will no longer be lit. The
LCD screen will indicate ‘BREWING’ and the
selected brew size.
If the ‘BREW’ button is not pressed in 60 seconds,
the LCD screen will indicate ‘OPEN HEAD’ and the
‘BREW’ button will be disabled to prevent accidental
activation. To re-activate the brew sequence, open
the Brewing Chamber Head by raising and lowering
the Safety Locking Arm completely.
Note
BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 11