Breville BKC600XL - Manual (Page 18)

17
Setting the ‘CLOCK SET’ feature
Setting the clock is optional. When the clock is set,
the time will appear on the LCD screen.
You must set the clock if using the ‘ON-OFF
TIME’ feature.
Note
1. Press the ‘MENU’ button. The menu programming
options will appear on the LCD screen with a
blinking indicator on ‘CLOCK SET’.
2. Press the ‘OK’ button. The hour will blink,
indicating the hour is ready to be set.
3. Press the or button to reach the
appropriate hour. If the hour has passed 12, the
indicator switches from AM to PM.
4. Once the appropriate hour is reached, press the
‘OK’ button. The minutes will blink, indicating
that the minutes are ready to be set.
5. Press the or button to reach the
appropriate minute.
6. Once the appropriate minute is reached, press
the ‘OK’ button. The LCD screen will return to the
menu programming options.
7. To exit the menu programming options, press the
‘MENU’ button. Alternatively, press the button
to reach ‘EXIT MENU’ and press the ‘OK’ button.
The LCD screen will return to the main screen
and indicate the time selected.
If power is interrupted to the Brewer, the clock
will need to be reset. Programmed brew size and
brew temperature settings are remembered and
restored automatically. All other settings will be
restored automatically after the clock is reset.
Note
Setting the ‘ON-OFF TIME’ feature
This feature allows you to program the specific time
when the Brewer will automatically turn on and/or
off. By programming your Brewer to automatically
turn on, you will not have to wait for the Brewer to
heat the water in the Water Tank. It will take the
Brewer approximately 3
1 /
2
minutes to heat the water
from room temperate.
You must set the clock if using the ‘ON-OFF TIME’
feature.
An alternative to setting the ‘ON-OFF TIME’ feature is
to leave the Brewer on all the time. We recommend
this so your Brewer is always ready to brew a fresh
cup of gourmet coffee, tea or hot cocoa.
To turn the Brewer off at any time, press and
release the Power Switch on the lower back,
right side of the Brewer. The clock will remain on
if set, however you can not activate the brew
cycle. Press and release the Power Switch again
to restore power to the Brewer. You will have to
wait for the water to heat up before the Brewer
is ready to brew.
Note
continued
Menu and programming options
t brew
ed
button
te. The
oved to
gs.
flow
card the
mpletely
BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 17