HF scientific Online SCADA System - Manual (Page 7)

(8/02)
Rev 1.2
5
Highlight the file in the Startup Process Files box and then click on the Remove
button. Now click the Add button. Navigate to the SCADA folder. Three files
will appear in an Open File dialog box. The files are
server.l4p
client.l4p
report.l4p
Highlight these files and click on the Open button. Click on the OK button to exit
out of Startup.
Fig. 2-3
The above procedure will automatically load the three process files that the
turbidity data acquisition application comprises, every time Lookout is launched..
Please note that the above procedure is true for a single node operation (only one
PC is used). For multi-node client / server operations, the client nodes must only
be loaded with the client.l4p and report.l4p process files. The server.l4p must
not be loaded into the client machines. Also, the client.l4p and report.l4p process
files that are loaded into the client nodes have to be modified in order to ‘point’
the processes to the appropriate server node. Please contact your vendor for
details
.