HF scientific MicroTSCM Streaming Current Monitor - Manual (Page 12)

MICROTSCM (07/09) Page 8
REV 2.4
4.4 Analyzer Mounting
The analyzer is not weather tight and this must be taken into consideration during site
selection. The analyzer provides the control outputs via 4-20 mA and alarms. It is
recommended that the analyzers be mounted in a location for easy viewing and keypad
access. The analyzer can be flipped on its mount to gain access to the electrical
connections.
Please refer to the drawing below for mounting dimensions and hole location.
Figure 5: Analyzer Mounting